ALUMINIUM HIGH PRESSURE FILTERS

FH high pressure filters for industrial applications with pressures up to 50barg (725psig).

Strong cast aluminium or carbon steel construction (only for FH*1000 model).

All housings are powder coated to prevent corrosion.

HF series is produced in accordance with directive PED 97/23 CE.

FOUR LEVELS OF FILTRATION:

Filter grade	Air quality	Application example
P SERIES – 3 MICRONS	Filter capable to separate emulsion and particles down to 3 micron	Normally installed on the inlet of dryers. Ideal as pre-filter for on-line filters (series S – X – Z) and for vacuum pumps, pneumatic blowing plants.
S SERIES – 1 MICRONS	Filter capable to separate particles down to 1 micron, liquid an oil included. Maximum contents of residual oil 0,1 mg/m³.	Normally used on outlet of dryers as (X) grade pre-filter. Used to prevent the deterioration of the pipes of compressed air plants, for surface treatment, on vacuum pump exhaust, on compressed air motors, and as post-filter for adsorption dryers.
X SERIES – 0.01 MICRONS	Oil removing filter capable to separate residual oil and extremely small particles down to 0,01 micron. Maximum contents of residual oil 0,01 mg/m³. It produces air technically free from oil.	Used for the protection of control system, pneumatics haulage, painting system and as pre-filter for adsorption dryers.
Z SERIES – ACTIVE CARBON	Activated carbon filter for the elimination of oil vapours and odour. When installed, after a (X) grade filter, it lowers the maximum contents of residual oil 0,003 mg/m³.	Used in the pharmaceutical industry, for dental applications, in photographic workshops, packaging and galvanic treatments.